Did your organization encourage toilet replacements in the 1990s that ultimately led to customer dissatisfaction with new 1.6-gallon/6.0-Litre toilets? Did you also experience negative customer feedback on those dreaded “low flow” toilets? Well, if you did not, other water providers certainly did! Clogging, double-flushing, and generally poor flush performance characterized some of the early 1.6-gallon/6.0-Litre fixtures….and that “reputation” seems to still remain with some consumers.
Those experiences led to a groundbreaking step by those same water providers in 2002, when 22 sponsoring organizations in the water utility industry stepped forward and funded the development of a more rigorous test protocol, which ultimately became known as Maximum Performance (MaP) testing.
MaP testing of toilet fixtures is the 21st century solution to assessing flush performance. Using testing materials closely resembling the “real world” demands on toilets, the MaP protocol tests toilets to the point at which they no longer evacuate all waste in a single flush…..hence, the term maximum performance!
Waste is represented by soybean paste and toilet paper. Minimum acceptable waste removal thresholds of 250 grams (about 9 ounces) and 350 grams (12 ounces) are used by water efficiency advocates and water providers throughout North America for water conservation programs. The U.S. Environmental Protection Agency’s WaterSense Product Labeling Program sets its minimum threshold at 350 grams; some water providers employ a 500 gram (about 18 ounces) minimum threshold for qualifying toilets for their rebate programs.
For a more complete history of MaP and how it developed, check this background description.
Your customers have the opportunity to review the performance of hundreds of different toilet fixture models, all of which have been tested at independent laboratories. The following search parameters are available to customers, design professionals and manufacturers:
…and it’s FREE !
Since its development and release in 2003, MaP has been a major driving force in the improvement of toilet flush performance in North America. In 2003, the average MaP score of all tested toilets was about 350 grams (12 ounces), while by August 2008, the average score of 746 different toilet fixture models had nearly doubled to about 675 grams (24 ounces). The competitive pressure to improve fixture performance from the unacceptable levels of the 1990s, together with MaP as a vehicle to measure performance, has resulted in many hundreds of high-performance 21st century models, for which the manufacturers must be given great credit!
Remember, though, MaP is a VOLUNTARY testing program. Manufacturers may choose to participate, but are under no compulsion to do so. Therefore, your customers need to know that not all toilet models found in the marketplace (at retail outlets or plumbing supply houses) will have been MaP tested.
For answers to frequently asked questions about MaP, check our FAQ page.
Significant flush performance improvements were achieved in the 5-year period from 2003 - 2008.